1. Windows Is Loading Files Startup Repair Loop Windows 7
  2. Start Computer Windows Is Loading Files Then Startup Repair
  3. Startup Files In Windows 10
  4. Windows 10 Keeps Loading Startup

Jul 05, 2017  On Windows 8 or 10, click the “Repair your computer” option instead of “Install now” in the installer screen. Then select Troubleshoot Startup Repair to run startup repair. On Windows 7, you’ll see a “Repair your computer” link in the same place. Click this and Windows will run the startup repair tool. Mar 19, 2015  If Windows still doesn’t continue after the “Windows is loading files” screen, continue with Fix #6 below or go to Fix Stuck at Windows is loading files with EasyRE. Fix #6: Run Startup Repair. To run the Startup Repair utility on your Windows Vista or Windows 7, follow these steps.

Get the fix for the infinite Startup Repair loop error for the following Windows versions: Windows Vista, Windows 7, Windows 8 or Windows 8.1.

This error prevents you from accessing anything on your computer and presents an endless loop of loading Startup Repair without end.

Contents

  • 1 About “Startup Repair in Infinite Loop”
  • 2 Causes of this error
  • 4 Fixes for Infinite Loop of Startup Repair on Windows Vista, 7
  • 5 Fixes for Automatic Repair Loop in Windows 8
  • 6 More Information

About “Startup Repair in Infinite Loop”

The following information on this error has been compiled by NeoSmart Technologies, based on the information gathered and reported by our global network of engineers, developers, and technicians or partner organizations.

Symptom 1: Computer attempts to enter Startup Repair continuously

Every time the PC is restarted, before Windows begins to load a message is displayed indicating that “Windows failed to start,” and offering an option to “Launch Startup Repair (recommended)” from a variation of the Advanced Boot Options menu as shown below:

Startup Repair will then either fail to load, launch but fail to repair, or run and claim repairs have been executed — however your PC will continue to attempt to endlessly start Startup Repair each boot.

On Windows 8 and Windows 8.1 this is called Automatic Repair:

The Log file path can be different.

Causes of this error

This error has been known to occur as a result of one or more of the following:

Cause #1: Damaged or corrupted BCD settings

Bootsector viruses and other malware that targets the bootloader or the booting chain can cause errors in the bootloader settings and state that result in an infinite loop of Startup Repair.

The virus may then block Startup Repair from either launching or carrying out its repairs successfully. A failed Windows Update or Automatic Update can also sometimes leave the Boot Configuration Data (BCD) in an inconsistent or non-working state.

Cause #2: Corrupted boot partition

On Windows 7 and above, Windows by default creates a separate 100 MiB NTFS partition at the start of the drive, reserved for core bootloader files and BCD configuration.

An unsafe shutdown, sudden power loss, hard disk failure, or a blue screen of death during writes to the boot partition can leave your system in an inconsistent state, unable to boot and infinitely cycling into the Startup Repair.

Cause #3: Blue Screen of Death on reboot

It is possible that every other time Windows attempts to boot, a BSOD occurs.

Recent versions of Windows are configured to hide this fact from the user and silently reboot.

(In the experience of the researchers at NeoSmart Technologies, there is almost never a good reason for doing this. Microsoft is hoping that a reboot will fix your PC and so Windows decides to hide the blue screen and reboot, endlessly and in vain.

A much more intelligent solution would be for Windows to keep track of whether or not this blue screen resulted in a silent and automatic reboot last time, and if so, show it so the user can see what’s going on.)

A BSOD during boot up will trigger a version of the Advanced Boot Options menu to be shown on next reboot prompting the user to select “Repair Your Computer,” ultimately causing the endless loop of Startup Repair.

Guaranteed Fix: Use Easy Recovery Essentials

Easy Recovery Essentials is guaranteed to fix the “endless repair computer loop” error automatically using its built-in Automated Repair option. EasyRE is currently available for Windows XP, Vista, 7 and 8 and can be downloaded and created on any PC.

  1. Download Easy Recovery Essentials. Make sure to note your Windows version (XP, Vista, 7 or 8) before you download EasyRE. This guide can help you identify what version of Windows you have installed.
  2. Burn the image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot up your PC from the Easy Recovery Essentials CD or USB you created.
  4. Once EasyRE is running, choose the “Automated Repair” option and click Continue.

    Choose “Automated Repair” in Easy Recovery Essentials

  5. After EasyRE scans your computer’s drives, identify and select the drive letter for your Windows installation from the list, and then click on the Automated Repair button to begin.

    Choose the drive associated with the Windows installation you’re trying to repair.

  6. Easy Recovery Essentials will start analyzing the selected drive for problems. EasyRE will test for and attempt to automatically correct errors with the disk, partition, bootsector, filesystem, bootloader, and registry. No intervention is required, as EasyRE’s repair is fully automated:

    Easy Recovery Essentials searches for errors and makes corrections to the selected Windows installation.

  7. Once the process is complete, EasyRE will report its findings. Click on the Restart button to reboot your PC and test the changes.
  8. The “endless repair computer loop” error should now be fixed as your PC begins to load:

You can download Easy Recovery Essentials from here.

Fixes for Infinite Loop of Startup Repair on Windows Vista, 7

Windows Setup CD/DVD Required!
Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

Fix #1: Run chkdsk on the boot volume

The command line chkdsk tool ships with Windows and can be used to check (and sometimes repair) your drives for filesystem corruption. More information about how chkdsk operates and how it works can be found in our knowledgebase. The following steps will launch the command line option from Startup Repair on the Windows setup disc and use the chkdsk utility.

Unable to boot into the Windows setup CD?
See our guide on setting up a PC to boot from the CD or DVD for troubleshooting and more detailed instructions.

  1. Insert your Windows installation DVD into your PC’s CD-ROM drive,
  2. Fully power down your PC, and make sure it has fully shut off,
  3. Power up your PC,
  4. Press any key when you see “Press any key to boot from CD or DVD.”
  5. Click the link titled “Repair your computer” in the bottom-lefthand corner, after first selecting your language and keyboard options.
  6. Wait for Startup Repair to scan your PC for Windows installations, then select your install from the list it shows:
  7. Choose “Command Prompt” from the list of available recovery options to begin:

Once the command prompt is launched, enter the following to use the System File Checker to check your installation for corrupted, invalid, or deleted system files. If the previous page showed that your Windows installation has a drive letter other than C:, make sure to use that below!

chkdsk will begin scanning your drive for problems, fixing them if it is able to, and reporting its progress when done.

Fix #2: Disable Automatic Restart

This option lets you get the exact and complete error message accompanying the Blue Screen of Death by disabling the Automatic Restart option of Windows. Note: this will not fix the boot error you are experiencing in and of itself, but should provide more information that may prove critical in solving the underlying problem.

The option to disable automatic restart on system failure is available from the Advanced Boot Options menu at startup. The instructions below will trigger this behavior, more detailed instructions on disabling automatic restart on system failure are also available in our knowledgebase.

Windows Is Loading Files Startup Repair
  1. Restart your computer
  2. Wait for your BIOS to complete POST (the screen with your manufacturer logo and/or system information)
  3. Quickly begin tapping F8 repeatedly, until you see the list of boot options
  4. Choose “Disable automatic restart on system failure”
  5. Press Enter and wait for your PC to boot.

Windows Is Loading Files Startup Repair Loop Windows 7

Fix #3: Manually attempt to rebuild the BCD

Problems booting up Windows can often be traced back to errors in the bootloader installation or configuration. Rebuilding your PC’s master boot record (MBR), partition bootsectors, and boot configuration data (BCD) can fix various problems with the BOOTMGR bootloader.

You can rebuild the BCD using bootrec.exe, a tool built found in the Windows Recovery Environment. Follow these steps:

  1. Insert your Windows installation DVD into your PC’s CD-ROM drive,
  2. Fully power down your PC, and make sure it has fully shut off,
  3. Power up your PC,
  4. Press any key when you see “Press any key to boot from CD or DVD.”
  5. Click the link titled “Repair your computer” in the bottom-lefthand corner, after first selecting your language and keyboard options.
  6. Wait for Startup Repair to scan your PC for Windows installations, then select your install from the list it shows:
  7. Choose “Command Prompt” from the list of available recovery options to begin:
  8. Once the command line has launched, type in the following commands in the Command Prompt and hit Enter after each command:

Unable to boot into the Windows setup CD?
See our guide on setting up a PC to boot from the CD or DVD for troubleshooting and more detailed instructions.

BCD not getting rebuilt?
There is an entire entry in our wiki dedicated to advanced manual repair of the bootloader that can also be followed, if necessary.

Fixes for Automatic Repair Loop in Windows 8

Windows Setup CD/DVD Required!
Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

Fix #1: Boot into Safe Mode

Often booting into Safe Mode and uninstall recently install device drivers or software may fix the Automatic Repair loop error.

To boot into Safe Mode of a Windows 8 or 8.1 system, you need to have the original DVD or USB. If you don’t have it, go to Fix with Easy Recovery Essentials.

  1. Insert the disc and reboot the system
  2. Press any key to boot from the DVD
  3. Choose your keyboard layout
  4. Click Repair your computer at the Install now screen
  5. Click Troubleshoot
  6. Click Advanced options
  7. Click Startup Settings
  8. Click Restart
  9. Press F4 to boot into Safe Mode

If booting your system in Safe Mode doesn’t solve the error, go to Fix #2: Run bootrec.

Fix #2: Run bootrec

Running the bootrec utility to rebuild the BCD might fix the error. To run bootrec.exe on Windows 8 or 8.1, follow these steps:

  1. Insert the original Windows 8/8.1 install DVD or USB

    If you don’t have the installation DVD or USB, go to Fix Automatic Repair Loop with Easy Recovery Essentials.

  2. Click Repair your computer
  3. Click Troubleshoot and then Advanced options
  4. Click Command Prompt
  5. When Command Prompt loads, type these commands:
  6. Press Enter after each command
  7. When the last command – bootrec /rebuildbcd – finished the process, type exit and restart your computer

Fix #3: Run chkdsk

The chkdsk utility might fix the Automatic Repair Loop on Windows 8 and Windows 8.1 systems

To access it, follow the same steps as the Fix #2: Run bootrec to reach Command Prompt:

  1. Click Troubleshoot > Advanced options > Command Prompt
  2. When Command Prompt loads, type these commands:
  3. Press Enter

Fix #4: System Restore

To access System Restore, follow the same steps as Fix #2: Run bootrec to reach the Advanced Options screen:

Start Computer Windows Is Loading Files Then Startup Repair

  1. Click Troubleshoot

    Troubleshoot in Windows 8 recovery options screen

  2. Click System Restore
  3. Follow the wizard instructions to continue the process. Choose a restore point before the date when the Automatic Repair loop error appeared.

More Information

Linked Entries

Support Links

  • Easy Recovery Essentials for Windows – our repair and recovery disk.
    It’s an easy-to-use and automated diagnostics disk. It’s available for Windows 8, Windows 7 and Windows Vista. It’s also available for Windows XP and Windows Server.

    Read more at Windows Recovery Disks.

  • The NeoSmart Support Forums, member-to-member technical support and troubleshooting.
  • Get a discounted price on replacement setup and installation discs: Windows Vista, Windows 7, Windows 8.

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

  • Windows Vista (all editions)
  • Windows 7 (all editions)
  • Windows 8 (all editions)
  • Windows 8.1 (all editions)
  • Windows Server 2008 (all editions)
  • Windows Server 2012 (all editions)

Get the fix for whenever Windows is stuck at the Windows is loading files screen. This fix applies to the following Windows versions: Vista and 7.

Jan 22, 2017  Don Bradman Cricket 17 – Download / Crack / Torrent. Don Bradman Cricket 17 Download is a games amusement for PC/Windows, created by Big Ant Studios (the makers of the Sprint Cars arrangement, Rugby League Live, and a few different preparations) on account of cricket fans. The title is the successor of 2014″s Don Bradman Cricket 14. Despite not having an official license, Don Bradman Cricket 17 is one of the best cricket games I have ever played. I loved Brian Lara Cricket back on the Sega Mega Drive so this is a sport I have always had a real soft spot for. Hitting For Six. Let’s start by talking about what Don Bradman Cricket 17. Don Bradman Cricket 17 brings a new revolutionary control system delivering the best batting, bowling and fielding experience by providing you an even greater level of variety and precision of play. Motion captured first class cricketers, including Female Cricketers for the first time in all game modes. Download and play with thousands of Community created Players, Teams, Stadia and logos. Mar 19, 2019  Don Bradman Cricket 17, free and safe download. Don Bradman Cricket 17 latest version: Another Installment for the Don Bradman Series. Don Bradman Cricket 17 is a sports game created by Big Ant Studios. The sports game features vast. Cricket

Contents

  • 2 Other fixes for Stuck at Windows is loading files
  • 3 More Information

Fix Stuck at Windows is loading files with EasyRE

Easy Recovery Essentials can fix many errors such as this automatically using its built-in Automated Repair option. EasyRE is currently available for Windows XP, Vista, 7 and 8 and can be downloaded and created on any PC.

  1. Download Easy Recovery Essentials. Make sure to note your Windows version (XP, Vista, 7 or 8) before you download EasyRE. This guide can help you identify what version of Windows you have installed.
  2. Burn the image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot up your PC from the Easy Recovery Essentials CD or USB you created.
  4. Once EasyRE is running, choose the “Automated Repair” option and click Continue.

    Choose “Automated Repair” in Easy Recovery Essentials

  5. After EasyRE scans your computer’s drives, identify and select the drive letter for your Windows installation from the list, and then click on the Automated Repair button to begin.

    Choose the drive associated with the Windows installation you’re trying to repair.

  6. Easy Recovery Essentials will start analyzing the selected drive for problems. EasyRE will test for and attempt to automatically correct errors with the disk, partition, bootsector, filesystem, bootloader, and registry. No intervention is required, as EasyRE’s repair is fully automated:

    Easy Recovery Essentials searches for errors and makes corrections to the selected Windows installation.

  7. Once the process is complete, EasyRE will report its findings. Click on the Restart button to reboot your PC and test the changes.
  8. The “Stuck at Windows is loading files” error should now be fixed as your PC begins to load:

You can download Easy Recovery Essentials from here.

Other fixes for Stuck at Windows is loading files

Windows Setup CD/DVD Required!
Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

These fixes can be applied for both Windows Vista and Windows 7.

Fix #1: Check your HDD and RAM

Startup Files In Windows 10

This error – having Windows stuck at the “Windows is loading files” screen – can be caused by either a corrupt or failed hard disk or bad RAM memory sticks.

If you have multiple HDDs and RAM memory sticks, follow these tips:

  • Remove the additional hard disks from your PC and only leave the main HDD. Restart your computer to see if the “Windows is loading files” screen loads correctly.
  • Remove additional RAM memory sticks and leave only 1 memory stick. Restart your computer and check if the error appears again.

To test if your hard disk or RAM memory is healthy and not corrupted or failed, run Automated Repair from Easy Recovery Essentials (our recovery and repair disc). The Automated Repair process will report any issues found with your HDD or RAM.

  1. Burn the ISO Image. Follow our instructions on how to burn a bootable ISO image. If you’d like to have a recovery USB instead, follow our instructions on how to make a recovery USB.
  2. Boot into Easy Recovery Essentials
  3. Select Automated Repair
  4. Click Continue and wait for the Automated Repair process to finish. Automated Repair process will report any issues found with your hard disk or RAM memory:

To download Easy Recovery Essentials, click here.

Fix #2: Reset BIOS

If Fix #1 above doesn’t fix the getting stuck at the “Windows is loading files” screen error, you can try to reset your computer’s BIOS settings.

You can either reset your BIOS settings or upgrade your BIOS version to the latest available.

To reset your computer’s BIOS settings to the default settings, follow these steps:

  1. Restart the computer
  2. Press the necessary key to boot into the BIOS menu. This key is usually any of the following, depending on the computer manufacturer: Esc, Del, F2, F8, F12.The key you need to press is usually displayed on the first screen as your computer boots, just before the Windows logo appears.Here’s the F12 key necessary to open BIOS menu displayed on a Dell computer:

    Notice the key guide in the top-right corner.

  3. Find the option to reset your BIOS or load its default options. This is usually called any of the following:
    • Load Default
    • Load Fail-Safe Defaults
    • Load BIOS Defaults
    • Load Default Settings
    • Load Setup Default
    • Get Default Values
  4. Save these changes and exit the BIOS menu

If reseting your BIOS to its default settings doesn’t fix the error, try updating BIOS to its latest version available.

Fix #3: Boot into Safe Mode

Fix #3 and Fix #4 are easy fixes that you can try to attempt at fixing the “Windows is loading files” error.

Booting into Safe Mode and trying to uninstall recently installed software applications or drivers could fix this issues.

To boot into Safe Mode, follow these steps:

  1. Restart your computer
  2. Press the F8 key as soon as your computer starts. You need to press the key before the Windows Vista or Windows 7 logo appears.
  3. At the Advanced Boot Options menu, select Safe Mode
  4. Press Enter

Fix #4: Boot into Last Known Good Configuration

If Fix #3 doesn’t solve the error, try the Last Known Good Configuration mode.

To boot into this mode on your Windows Vista or Windows 7, follow these steps:

  1. Restart your computer
  2. Press the F8 key to open the Advanced Boot Options menu

    The advanced boot options startup menu.

  3. Select the Last Known Good Configuration option
  4. Press Enter

Fix #5: Disable automatic restart on system failure

If the “Windows is loading files” error is caused by a STOP error, you can try to disable the automatic restart on system failure option in order to determine which STOP error is causing this error.

To identify the STOP error and troubleshoot it, follow these steps to disable this option on your Windows Vista or Windows 7:

  1. Restart your computer
  2. Press the F8 key before the Windows Vista or Windows 7 logo appears
  3. At the Advanced Boot Options menu, select the Disable automatic restart on system failure option
  4. Press Enter
  5. Your computer should now reboot
  6. If a blue screen appears next, after the restart, note the STOP error and troubleshoot it. If Windows still doesn’t continue after the “Windows is loading files” screen, continue with Fix #6 below or go to Fix Stuck at Windows is loading files with EasyRE.

Fix #6: Run Startup Repair

To run the Startup Repair utility on your Windows Vista or Windows 7, follow these steps:

  1. Insert the original Windows Vista/7 installation disc (the install DVD)
  2. Press any key to boot from the DVD
  3. At the Welcome screen, click Repair your computer
  4. Choose your operating system
  5. At the System Recovery Options screen, select Startup Repair

    Windows 7 System Recovery Options Screen

  6. Wait for the Startup Repair utility to finish
  7. Restart your computer

Fix #7: Run bootrec

Using the bootrec.exe utility, provided on your Windows Vista or Windows 7 installation DVD, you can fix the MBR of your computer and attempt to fix the “Windows is loading files” error.

Follow these steps to open and run the bootrec utility:

  1. Insert the Windows Vista/7 DVD and boot from it (press any key at the Press any key screen to boot from the media)
  2. Select a language, keyboard method
  3. Click Next
  4. Click Repair your computer at the Welcome screen
  5. Choose your operating system from the list
  6. Click Next
  7. Click Command Prompt from the System Recovery Options menu
  8. Type these commands and press the Enter key after each:
  9. Type:
  10. Press Enter
  11. Restart your computer

bootrec utility results screen

Fix #8: Run chkdsk

If Fix #7 doesn’t work, you can also try to run the chkdsk utility and check the integrity of your computer’s HDD:

  1. Follow the steps from Fix #7 until you reach Command Prompt
  2. When Command Prompt is open, type this command:

    Where C: is the letter of the drive where your Windows Vista or Windows 7 is installed.

  3. Press Enter
  4. Type:
  5. Press Enter
  6. Restart your computer

Fix #9: Reinstall Windows

If none of the fixes explained above works to fix the “Windows is loading files” error, you can to reinstall your Windows Vista or Windows 7.

Reinstalling Windows Vista/7 means you will loose all data if you don’t backup your personal files. You can use the Browse/Backup Files feature from Easy Recovery Essentials to access your computer and backup your personal files on a USB drive.

To reinstall Windows Vista or Windows 7, follow these steps:

  1. Insert the installation DVD and boot from it
  2. Select a keyboard method and language and click Next
  3. Click Install Now at the Welcome screen
  4. Follow the wizard to complete the installation process

Windows 7 Install Now screen

Windows 10 Keeps Loading Startup

More Information

Linked Entries

Support Links

  • Easy Recovery Essentials for Windows – our repair and recovery disk.
    It’s an easy-to-use and automated diagnostics disk. It’s available for Windows 8, Windows 7 and Windows Vista. It’s also available for Windows XP and Windows Server.

    Read more at Windows Recovery Disks.

  • The NeoSmart Support Forums, member-to-member technical support and troubleshooting.
  • Get a discounted price on replacement setup and installation discs: Windows Vista, Windows 7.

Applicable Systems

Windows Is Loading Files Startup Repair

This Windows-related knowledgebase article applies to the following operating systems:

  • Windows Vista (all editions)
  • Windows 7 (all editions)