Oct 09, 2018 VCDS 18.9.0 update from VCDS 18.2.1, Crack cable can not update online, will damage the cable. Need eobdtool.com VCDS 18.9 vag com cable, or wanna update to VCDS 18.9, just download ross tech VCDS 18.9 software & loader as following. VCDS 18.9 VAG COM Cable VCDS 18.9.0 VAG K+CAN USB Interface. VCDS 18.9.0 Download Free. Dec 11, 2017 VCDS download. Displays timing information on TDI engines. Download Review Comments Questions & Answers Download the latest version from Software Informer. Scanned by 74 antivirus programs on Jun 20, 2020. The file is clean, see. All Ross-Tech VCDS products work with VAG vehicles (except Routan) from 1995 through the current model year (and with a 2×2 adapter can extend the model year coverage back as far as 1990). Our products are broken into two classes: Professional (Unlimited) and Enthusiast (Limited).
What is VCDS?
VCDS (www.ross-tech.com)is short called “VAG-COM Diagnostic System ”,also called VAG-COM.VCDS is primarity used for diagnostic and adjustment for Volkswagen Group vehicle.VCDS will perform most of functions that only performed by expensive official dealers,it is very suitable for DIY user and garage.
VCDS Functions List:
Control Unit Info
Read Fault Codes
Selective Output Tests
Clear Fault Codes
Code Slave Modules
Advanced Measuring Values
Guided Readiness Scripts
Dual K-Line Support
Digit PINs (VAS only)
Code Database Up to Date
Diagnostics via CAN
Support for Dual ECUs
Graphic TDI Timing Checker
Control Module Finder
Automate Service Reset (SRI)
ECU Mileage Checker
Controller Channel Maps
Wireless Connection via WiFI
VCDS Support Vehicle Models List:
The following VCDS Compatibility Charts are based on Model and Chassis Type. To find the Chassis Type for your car, look at the 7th and 8th digits of the VIN number. The Chassis type will usually be found in these digits. There are exceptions.
Example (Audi A6):
The 7th and 8th digits are 4F for Audi A6 (4F), the 10th digit is 6 which stands for Model Year (MY) 2006. See the Model information Column for Audi to find the A6 Model. Note that the Chassis Type “4F” is listed under that model. Look horizontally across the VCDS Compatibility Chart until you find the Model Year 2006 and you can determine which interface(s) is required for that Chassis. In this particular case you will see that only the HEX+CAN series interface is compatible.
Please Note: Older VCDS versions may not support all of the model years listed. These charts are intended for the most current version of VCDS (in rare cases even Beta Versions).
Check the VCDS Compatibility Charts to get details
VCDS Support Languages:
Česky,Chinese,Dansk,Deutsch ,Español ,Français,Italiano,Magyar ,Nederlands,Polski,Português,Romana,Russian,Svenska
VCDS software, free download
VCDS with Loader v9.2 – English 19.6.0, non-English (tested PL and HU)
VCDS 17.8 MULTILANGUAGE FULL.txt
Below download links are shared from some forum member,for newest software please go to original official website:https://www.ross-tech.com
In pack you will find:
Loader V2 compatible with RL-RQ-BL-BM interfaces.
Reworked tool for update interface by USB – keeps count of type of hw in eeprom.
New eeprom dumps for each version of hardware
Included in pack Progisp v1.72 and also Mprog 3.5 with templates
Remade projects with new dumps for Progisp and TL866
All versions released until today on any language work even NEZ one 🙂
UPA VCDS FUSES for HW44 and HW46.zip
VCDS Loader V4.txt
New version with new eeprom, need to rewrite your interface with new usb flasher.
One multilingual eeprom is not possible anymore. Use VAGCOM_EEWriteLang to write eeprom of your choice.
VCDS Computer Requirements:
VCDS requires a computer running Microsoft Windows (the HEX-NET can be used with VCDS-Mobile on other platforms but that use is still in beta testing). A Laptop is most convenient but a desktop PC can also be used.
We recommend a PC running Windows 7, 8.1, or 10 with at least 2GB of RAM (single-core Atom-class processors are no longer recommended). Screen resolution of at least 800×600 is recommended.
How to Install VCDS Software:
Double click the icon desktop，wait for installing，as shown:
Wait for progress complete to 100%
Check “I accept the terms of the License Agreement”
Select components to install,then select “Next”
Wait for progress complete
Run VCDS software，connect VCDS VAG COM to your computer USB interface
Click Test,show that VCDS VAG COM hardware has been activated
Then click save，you can use VCDS VAG COM to test your car
As shown，choose function you want
This article show a guide on how to configure VCDS diagnostic cable for you laptop
Connect the USB end of your USB Interface or the Serial end of your Serial Interface to the correct port on your PC. If your PC is further from the vehicle’s diagnostic port than 6 feet,
connect an approved Extension Cable between the PC and the Interface.
If you are using a Serial Interface then you can proceed to step #4. If you are using a USB
Interface, a message like this should pop up:
The drivers many install automatically in Windows 7 or Vista. If you are using XP or W2000, click on the Found New Hardware message and the Found New Hardware Wizard should start up. If you are prompted with the choice, pick “No, Not This Time” when asked if you want to connect to the Internet to search for drivers. Select “Install the software automatically (Recommended)” then click [Next >]
The process should be automated but you may need to click “Continue Anyway” part way through the process.
Ck2 how to change religion. If, for some reason, you installed the USB Interface without following the above instructions, and VCDS does not work correctly, go into your PC’s Device Manager while the USB Interface is connected.
You can find the Device Manager by right-clicking on My Computer in XP or on Computer in Vista or 7. Select Manage to bring up Computer Management. On the left side of the screen under System Tools, select Device Manager.
Find the “VCDS Compatible USB Interface” or similar and delete it. It may be under “Other Devices” or under “Universal Serial Bus Controllers”. Next, unplug the USB Interface from your PC, wait 5 seconds and plug it back in.
Connect the car end of your Interface to your vehicle’s Diagnostic Port.
If your vehicle has a 2×2 port (some pre-1996 vehicles), then use the optional 2×2 Adapter between the Interface and the ports in the car. This is included in the Pro-Kit.
Turn the vehicle’s ignition switch to the ON position. Make sure the key is turned far enough that the dash lights are fully illuminated. The engine may either be running or stopped.
Start the VCDS program on your PC through either the Start Menu or the VCDS icon on your Desktop.
From the Main Screen in VCDS click the [Options] button to go into the Options screen.
Once you are in the Options Screen,Select the correct port for your PC’s USB Port (USB) or Serial Port (typically COM1 or COM2) and click the [Test] button. Ensure that VCDS finds your interface.
You should see a message like this:
If the Interface Status is “Not Found!”,check the connections at the car and PC.Make sure both are plugged in securely.Serial Interfaces get their power from the vehicle so they will not be recognized at all if not plugged into a car.
Adapter Type should always be “RossTech” followed by the name of the Interface such as “HEX-USB+CAN”.
Version indicates the firmware version of your Interface. It may be updated by new versions of VCDS, if so follow the prompts on the screen.
Once you have tested successfully, click [OK] then click [Save] to apply this configuration,you will be returned to the Main Screen. Click on [Select] to view the Select Control Module Screen. Select one of your car’s Control Modules such as Engine.
Note: Your car will not have all the Control Modules listed in VCDS, only the functional ones that were installed in your vehicle.
After VCDS has connected, click on [Fault Codes] to check for Fault Codes (DTCs).Repeat the process for each of your car’s Control Modules.