*Only compatible with Windows Vista/7/8/10 OS (Does not operate on Mac OS)

This article includes all of the software downloads. Navigate through the tabs to select the software you need, click on the red 'Click here' link to download the program of your choice.


Device Updater

  1. .Only compatible with Windows Vista/7/8/10 OS (Does not operate on Mac OS). This article includes all of the software downloads. Navigate through the tabs to select the software you need, click on the red 'Click here' link to download the program of your choice.
  2. Top2007 advanced USB universal programmer Support chip 2000+ BRAND NEW! 100% test ok. Top2007Universal Programmer IC-Tester EPROM MCU MPU EEPROM PLD SRAM TTL CMOS Features: Support 2.56.5V device; Using USB for power source, does not need the external power supply; Transmission speed 12MHz/s via USB. With current protection function.
  3. Jan 04, 2011  I have a new TOP2007 programmer. It's software works on Windows XP and older Windows operating systems. This programmer uses USB port for programming and for power supply. 'If possible' I want to use it on windows vista on my laptop. If possible someone help me find a solution for this issue. Regards, Hazim.
  4. GQUSBprg 7.26: Aug-08-2020: 44350: This software is for latest GQ-4X V4(GQ-4x4) universal programmer only. It needs USB driver 3.0 to be installed first. This software does NOT work on older version GQ-4X. The newer version GQ-4x4 has two beep sounds from programmer when it is power on. The software works on Windows XP,Vista,7,8,8.1,10.

OS Requirements: Windows Vista/7/8/10

May 07, 2010  Download and run the Spring 2004 Original TV Tuner Driver Collection (sp24012.exe) Open Device Manager; Uninstall bad Conexant drivers highlighted by the yellow triangle with exclamation mark. Click Delete to remove the driver; Disconnect from the internet.

*Used to download updates for GTX, BDX, X4, Livewire, ITSX

Click hereto download the Device Updater.

Driver Windows 7 Free Download

Make sure all devices are unplugged during the install process.


Livelink Gen-II

OS Requirements: Windows Vista/7/8/10

*Datalogging software.

Click hereto download Livelink Gen-II.

Make sure all devices are unplugged during the install process.

Windows


Advantage III

OS Requirements: Windows Vista/7/8/10

Click hereto download Advantage III.

Make sure all devices are unplugged during the install process.


Drivers


Windows 32bit drivers click here.

Windows 64bit drivers click here.


Top

Install Instructions

Driver Windows 7 Ultimate


If you installed the SCT device updater before you plugged the device in then this should be easy to fix.

With your device connected:

Open your computers Device Manager.

Look for a device that is not installed like one with a yellow exclamation mark. (Here is a screenshot of what you are looking for.)

If you see this, right click it and select update driver.

A new window should open up and give you the option to either automatically search, or browse for files.

Click browse for files

Coolsand Umss Usb Device now has a special edition for these Windows versions: Windows 7, Windows 7 64 bit, Windows 7 32 bit, Windows 10, Windows 10 64 bit, Windows 10 32 bit, Windows 8,Windows 8 Enterprise 32bit, Windows 8 64bit, Windows Vista Enterprise (Microsoft Windows NT 6.0.6000.0) 64bit, Windows 10 IoT 32bit, Windows 7 Service Pack 1 (Microsoft Windows NT) 64bit, Windows Vista Home Basic 64bit, Windows 10 Education 64bit, Windows 7 Ultimate 32bit, Windows 10 Pro 64bit, Windows 10 Pro Education 32bit, Windows 10 Enterprise 32bit. Coolsand rda drivers.

Navigate to the folder you downloaded, and select “Open”.

If you did this correctly, it’ll tell you your drivers have successfully been updated and once you click “OK” you should see something similar to the picture below.

Now your communication should work between the device and the computer. With most devices, you will want to unplug it and plug it back in and restart the device updater. Then click “Display Device Settings and Serial” and if the serial number shows up, it is communicating.

Update Agent for GT's


Basic Steps to Update a GT Tuner

1. Run the Update Agent.

2. Connect the Micro SD card to your computer.

3. Choose the vehicle application and let the Agent search.

4. Click the Update button.

5. When the Update is finished, put the Micro SD card in the GT.

6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)


Detailed Steps to Update a GT Tuner

To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.


  1. Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
  2. Connect the SD with either the card reader or the GT itself and the USB cable
  3. Highlight the card in the update agent, and select “select device”

4. Select your device (40417, 40420, etc.) then select “download and upgrade”

5. Wait for the download to finish, you will see this message.

6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.




Download Driver Windows 7


526 downloads·Added on: January 30, 2012·Manufacturer: Others
Graphics:
1.Integrated Intel HD Graphics 2000
2.Discrete nVIDIA GeForce GT 540M (Optional)
Panel Resolution
21.5” (54.61cm ) 16:9, 1920 x 1080, Full-HD
Touch Panel
Multi Touch (Optional)
HDD:
640GB 3.5' SATA II
Optical Drive:
Tray-in DVD Super Multi
Audio:
2x3W 5.1 channel speakers with THX TRUSTUDIO PRO
LAN:
10/100/1000
Wireless LAN:
802.11 b/g/n WiFi
Bluetooth
N/A
USB 3.0 port:
2 (1 Port with Super Charger)
USB 2.0 port:
4
Card Reader:
6 in 1 (XD, SD, mini SD, Micro SD, MMC, MS)
eSATA: N/A
Webcam:
1.3M Webcam with Microphone
TV Tuner
Mini PCI-E interface (Optional)
Expansion Slot:
Mini-PCI-E slots x 2
HDMI in: N/A
HDMI out:
1
VGA in: N/A
VGA out: N/A
DVI-out: N/A
COM Port: N/A
Mic-in/Headphone-out: 1/1
Keyboard / Mouse: Wireless Keyboard and Mouse
AC Adapter:
120W / 150W
3D Glasses: N/A
Dimension(WxDxH):
555.1 x 404.98 x 66.46 mm
Net Weight:
7.7 KG
Gross Weight:
9.0KG
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Top 2004 Programmer Driver Windows 7 Ultimate

It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Top 2004 Programmer Driver Windows 7 Free

COMPATIBLE WITH:
Windows 7
file size:
665 KB
filename:
ae2240_tvtuner_win7_32.zip
CATEGORY:
TV Tuner / Capture Card