Jun 01, 2017  Chrysler, Jeep, Dodge diagnostic VCI interface wiTECH MicroPod 2 software updated!! Here, free download wiTECH software v17.04.27 and get the how-to’s of wiTECH 2 app installation to install Chrysler wiTECH software yourself! Also, a wiTECH MicroPod 2 v17.04.27 user manual of key programming is attach here for you. Part 1: v17.04.27 wiTECH download link. These files are in PDF format. Please visit www.adobe.com. If you require a viewer.

  1. Chrysler Diagnostic Tool
  2. Chrysler Diagnostic Computer

This article show a wiTech MicroPod 2 v17.04.27 free download link,it can work perfect on wiTech MicroPod 2 Clone.

What is wiTech MicroPod 2?

wiTech MicroPod2 is a vehicle diagnostic software that diagnosing and programming for Chrysler, Dodge, Jeep, and Fiat (North America).

wiTech MicroPod 2 Support Languages:

English, French, Spanish, German, Italian, Russian, Japanese, Korean and Chinese

wiTech MicroPod 2 Vehicle List:

Although small in stature, this dongle-style device offers 100% CAN – equipped coverage to 2016 for Chrysler, Dodge, Jeep, and Fiat vehicle platforms

wiTech MicroPod 2 Free Download:

Application Version: 17.04.27

Release Date: 5/2017

wiTECH VCI POD OS Version: 4.6.1

wiTECH MicroPOD II OS Version: 2.4.1

Note:Do not connect to network when you use the device.

How to install WiTech MicroPod 2 software 17.04.27 on Windows 7?

Step 1: install AdobeAIRInstaller.exe

Step 2: install jre-6u45-windows-i586.exe

Step 3: install wiTECH_Install_17.04.27.exe

Step 4: restart the computer

Pay attention:

The computer date must be set to that day. (The day you install WiTech MicroPod 2 17.04.27)

The computer must be connected to the Internet.

Connect the MicroPod 2 to computer to open the software.

When it pop up registration tips, turn off the software and turn it on repeatedly then you can use it.

Readers who read this article also read:

Chrysler, Jeep, Dodge diagnostic VCI interface wiTECH MicroPod 2 software updated!! here, free download wiTECH software v17.04.27 and get the how-to’s of wiTECH 2 app installation to install Chrysler wiTECH software yourself! Also, a wiTECH MicroPod 2 v17.04.27 user manual of key programming is attach here for you.

Diagnostic

Part 1: v17.04.27 wiTECH download link:

It’s wiTECH software crack

No need password for wiTECH MicroPod 2 login

No need wiTECH software license

Tested OK by professionals @obdii365.com

Safe to use with wiTECH MicroPod 2 clone (item no. SP271-C only)

Operation system of wiTECH 2 download:

Windows XP;

Windows 7

THE MOST IMPORTANT NOTES:

  1. The date of the computer must be the same as the fact
  2. The computer must be connected to the Internet
  3. Connect the machine to the MicroPod 2 to open the wiTECH software
  4. The system may ask you to turn off the software and turn it on for registration again. Repeat it for several times. Then you can use it normally

Part 2: How to install wiTECH MicroPod 2 v17.04.27 software crack:

Step 1 install AdobeAIRInstaller.exe

Step 2 install jre-6u45-windows-i586.exe

Step 3 install wiTECH_Install_17.04.27.exe

Step 4 Restart the computer

wiTECH diagnostic tool is ready for use!

Part 3: How to use wiTech MicroPod IIclone for auto key programming

Step 1

Plug the MicroPOD II device into the OBD port and connect the USB cable from the device to your laptop. This wakes the BUS on the car.

Step 2

Manually enter the VIN of the vehicle. This gives you access to the module list. Select the RFH (Radio Frequency Hub) module. This is the module where the key is registered.

Step 3

Chrysler Diagnostic Tool

Next select “Miscellaneous Functions,” then “Program Ignition Fobix.” At this point, you are prompted to enter the VIN again, followed by the four-digit PIN Code.

Step 4

After the four-digit pin is entered you are prompted to hit continue to “Program Ignition FOBIK.” Once you hit continue you must press the UNLOCK button on the FOBIX within 30 seconds (the FOBIX needs to be located near the center console during this procedure).

Step 5

Programming of the Ignition FOBIX is now successful. The new key key is accepted into the car, and the ignition will now turn on and start the car. At this point, you also have the option to program a second key.

Software

Part 3: How to use MicroPOD II clone for auto key programming

Step 1

Plug the MicroPOD II device into the OBD port and connect the USB cable from the device to your laptop. Nvidia web driver el capitan 10.11.6. This wakes the BUS on the car.

Step 2

Manually enter the VIN of the vehicle. This gives you access to the module list. Select the RFH (Radio Frequency Hub) module. This is the module where the key is registered.

Step 3

Next select “Miscellaneous Functions,” then “Program Ignition Fobix.” At this point, you are prompted to enter the VIN again, followed by the four-digit PIN Code.

Step 4

After the four-digit pin is entered you are prompted to hit continue to “Program Ignition FOBIK.” Once you hit continue you must press the UNLOCK button on the FOBIX within 30 seconds (the FOBIX needs to be located near the center console during this procedure).

Step 5

Programming of the Ignition FOBIX is now successful. The new key key is accepted into the car, and the ignition will now turn on and start the car. At this point, you also have the option to program a second key.

Things to Remember:

  • You must be online to program the key.
  • The PIN Code is only good for one session, which lasts 72 hours. After 72 hours the pin code expires.
  • If you input the wrong code for three-time it locks the BCM and you cannot service the vehicle for 24 hours.
  • The key is one-time programmable. Once married to the vehicle it is locked to the car forever. The key can be erased from the car and put back into the same car, but can’t be switched to another car.
  • The placement of the key during initialization is important. It needs to be placed either behind the shifter or in the center console.

Chrysler Diagnostic Computer

Who Viewed This Article Also Views: